APPLIED PRODUCTIVITY MEASUREMENT WITH OBJECTIVE MATRIX (OMAX) METHOD (Case Study: Service Department in PT. Astra International Tbk Auto 2000 - Kenjeran Branch)

 Abstract views: 133 ,  downloads: 106
  • suparto suparto Institut Teknologi Adi Tama
Keywords: Productivity, OMAX, Auto 2000

Abstract

  1. Astra International Tbk. Auto 2000 branch Kenjeran is a company department in sales, service and spare parts services. To evaluate the productivity in the service department for this time, it is necessary to measure productivity properly and correctly because productivity measures can be used as material for consideration in carrying out an upcoming productivity planning. This research was conducted in January-December 2013. The productivity method used is the Objective Matrix (OMAX) method. From the results of productivity measurements, it is known that the best productivity occurs in July, which is equal to 768.8, well above the standard value of 300. The worst productivity occurred in February, which amounted to equal 174,8. From the achievement of the score it can be seen that the criteria that do not contribute to the productivity index are criteria 1, namely the comparison between unit handling and the use of working hours because it has the smallest score to equal 47. The strategy for increasing productivity is to evaluate the causes of decreasing productivity in the lowest criteria.

Downloads

Download data is not yet available.

References

Anggraeni Santi Kirana, Katili Putri Bhuana, dan Satriansya Marisa, Pengukuran Kinerja Kualitas Pelayanan Menggunakan Metode Omax Pada Departemen Logisti Service PT. X, Jurusan Teknik Industri, Universitas Sultan Ageng Tirtayasa ; 2013
[2] Agustina Fitri dan Riana Aris. Analisis Produktivitas dengan Metode Objective Matrix (OMAX), Jurnal Teknik dan Manajemen Industri Vol. 6, No.2 Desember 2011 hal.150-158 Jurusan Teknik Industri, Universitas Trunojoyo Madura ; 2011
[3] Arman, Hakim Nasution. Manajemen Industri, Yogyakarta. Penerbit Andi ; 1990.
[4] Gaspersz Vincent, M.St., CIQA, CPIM, Manajemen Produktivitas Total (strategi peningkatan produktivitas bisnis Global), PT. Gramedia Pustaka Utama Jakarta ; 2000
[5] Henni, Pengukuran Tingkat Produktivitas Lini Produksi PT Kabelindo Murni dengan Menggunakan Pendekatan Metode Objective Matrix (OMAX). Enase vol 5, no 1, pp. 60-70 ; 2008
[6] Kholil Muhammad, Analisa Pengukuran Produktivitas Dengan Metode Objective Matrix (OMAX) pada Departemen Produksi, Jurnal Sinergi Vol. 14, No.1 Jurusan Teknik Industri, Universitas Mercu Buana Jakarta ; 2010
[7] Nurdin, R. Zabidi, Y. Pengukuran dan Analisis Produktivitas dengan Menggunakan Metode Objective Matrix. Yogyakarta: STTA ; 2004
[8] Saaty, T. L, Pengambilan Keputusan, PT. Pustaka Binaman Pressindo, Jakarta ; 1993
[9] Sinungan, Drs. M. Produktivitas Apa dan Bagaimana, PT Bumi Askara Jakarta 13220 ; 2004
[10] Susanti Lusi, Fatrias Dicky dan Kalangi Silviana, Strategi peningkatan produktivitas dilantai Produksi menggunkan Metode Objective Matrix (OMAX), Jurnal Reka Integra ISSN, Vol.01 Jurusan Teknik Industri Universitas Nasional Bandung (Itenas) ; 2014
Published
2019-07-31
How to Cite
suparto, suparto. (2019). APPLIED PRODUCTIVITY MEASUREMENT WITH OBJECTIVE MATRIX (OMAX) METHOD (Case Study: Service Department in PT. Astra International Tbk Auto 2000 - Kenjeran Branch). Tibuana, 2(02), 26-30. https://doi.org/10.36456/tibuana.2.02.1926.26-30
Section
Articles