PENGEMBANGAN ALAT BANTU LATIHAN UNTUK PROSES REHABILITASI BAGI PASIEN PASCA STROKE

 Abstract views: 69 ,  downloads: 569
  • Titiek Koesdijati Universitas PGRI Adi Buana Surabaya
  • M. Nushron Ali M Universitas PGRI Adi Buana Surabaya

Abstract

Stroke is a disease that is still considered terrible at this time, the cause is none other than
due to lifestyle and unhealthy diet. It is this condition that causes post-stroke patients can not freely
engage, therefore a therapeutic device design is needed so that patients can be cured of paralysis
immediately. The design process using QFD method so that the needs and designs are expected to
be in accordance with the wishes of the patient. Anthropometry is used to determine the size of the
patient's palm. The eco design method is used in the selection of materials to be used to support the
creation of green production. The results of anthropometric data measurement for the 5th percentile
are at Ptm = 73.26mm, Dgmak = 20.85mm, Ttm = 16.98, while for the 95th percentile in the Ltm =
92.32, Dgmin = 14.09, Lkt = 102.78 and Tgkt = 63.93. Test data reliability shows that the
adjustability aspect has the highest value of 0.9156, then ranks both finishing aspects with the value
of 0.867 and the last is the material aspect with the value 0.7562. Based on the overall attribute
used as instrumentation, which is a number of 13 attributes. The highest rating is on the easy
attribute in the assembly.

Downloads

Download data is not yet available.
Published
2017-12-01
Section
Artikel