Design of Wireless Remotely Operated Mobile Robot "Line Botic" for Cleaning Solar Panels

Ilmirizki Imaduddin; Ryoga Lybraocta Putra Wandanny; Moh Agung Amir Faruq; Thoriq Tuzani

doi:10.36456/best.vol5.no2.8034

Authors

Ilmirizki Imaduddin Electrical Engineering, Nurul Jadid University
Ryoga Lybraocta Putra Wandanny Electrical Engineering, Nurul Jadid University
Moh Agung Amir Faruq Electrical Engineering, Nurul Jadid University
Thoriq Tuzani Electrical Engineering, Nurul Jadid University

DOI:

https://doi.org/10.36456/best.vol5.no2.8034

Keywords:

cleaning sloar panels, linear velocity, Wireless remotely operated

Abstract

In this research, we will design a wireless remotely operator mobile robot 'linesbotic' for cleaning solar panels, using the open loop method, simply an electric motor that works on the principle of two magnetic fields that produce movement. The aim is to be able to produce a force that drives torque. The motor is installed to carry out certain work that requires the right speed and direction of rotation, so that the speed and direction of rotation of the motor can be adjusted in such a way as to suit the intended use of the motor. The results of the design and software testing for each component can work well according to the list of programs that have been created, while for hardware testing with interference conditions from passing vehicles, road lampposts, trees and buildings with an average percentage of 47% can be achieved. running well, and while testing the joystick in the forward position at angular velocity (-0.0) and at linear velocity (1.0), the joystick in the backward position at angular velocity (-0.0) and at linear velocity (-1.0), the joystick in the right position at angular velocity (-1.0) and at linear velocity (-0.0), the joystick is positioned to the left at angular velocity (1.0) and at linear velocity (-0.0).

References

Angquist, L. A. (2011). open loop control off modular multilevel converter using. IEEE transactions on industry applications, 47 (6), 2516 - 2524. https://doi.org/10.1109/TIA2011.2168593.

Huang, X. Z. (2011). Brushless DC motor design for an aircraft electro-hydraulic actuation system. IEEE International Eletrick Machines And Drives Converence,IEMDDC, may,1153-1158. https:doi.org/10.1109/IEMDC.2011.5994765.

Muhammad Hasan Basri, Sulistiyanto, Muhamad Imaddudin. Implementation of Shallot Pest Trap Model Based on Color Spectrum Using Photovoltaic Energy. Jurnal Penelitian Pendidikan IPA, 9(5), 3833–3838. https://doi.org/10.29303/jppipa.v9i5.3378

Dio Pramanda, A. (2020). Arduino Based DC Motor Speed Control System With Open Loop Method. JTEV (JURNAL TEKNIK ELETRO DAN VOKASIONAL , Vol. 06 No.01 ISSN : 2302-3309.

Abdillah, R. (2022). Lora Module Communication Performance in Multi Control Wet Dry Irrigation Techniques. Indonesian Agricultural Engineering Polytechnic (PEPI).

Ahmad Nazrul Aziz, E. p. (.). Implementation of the v Control Method, Based on Integral Proportional for Motion Control of Differential Driven Mobile Robots. ITS Keputih Sukolilo Surabaya Campus 60111, Surabaya Electronics Polytechnic.

Pitowarno, E. (2006). Robotics, Design, Control and Artificial Intelligence. Yogyakarta: Andi Publisher. [8] Yoski, M. &. (2020). Microcontroller-Based Trash Cleaning Robot Prototype With Ultrasonic Sensor. JIEIN: Indonesian electrical engineering journal, I(2), 158-161. https://doi,org/10.24036/jtein.v1i2.67.

Purba jamaluddin, e. a. (2022). Design of a prototype of a solar panel cleaning tool with an automatic motion system. journal of mechanical engineering studies, 7.1.

Muhammad malik al falah, n. s. (2021). Development Of Research And Commercial Products Solar Panel Cleaning Systems. Electrical Engineering Study Program, Faculty of Engineering, Udayana University, Vol, 8 No.4.

Adyapaka Apatya, O. A. (2023). Design And Evaluation Of A Solar Photovoltaic Cleaning Robot Using Wireless Communication Based On Radio Frequency Communication. https://jurnal.pcr.ac.id/index.elementer, Vol, 9.No. 1.

Nawan, Rifki Ardi, Muhammad Risyaf Raynaldi, and Adi Winarno. "Rancang Bangun Turbin Angin Savonius Generator DC Dengan Tegangan 24 Volt Sebagai Penerangan Jalan Daerah Pesisir." SinarFe7 5.1 (2022): 63-65.