DESIGN OF WOODWOOD MACHINERY USING ROUTER

DESIGN OF WOODWOOD MACHINERY USING ROUTER

 Abstract views: 205

Authors

  • Rusdiyantoro Rusdiyantoro Universitas PGRI Adi Buana Surabaya

DOI:

https://doi.org/10.36456/tibuana.1.1.1584.6-14

Keywords:

Sculpting Technique, Prototype, Designing

Abstract

The art of carving or engraving ornament is the image with certain parts, usually  concave, convex or flat, patterned and has a motive. Sculpture can be formed pictures on wood, acrylic, or other materials. In making this product a design researcher perform analysis or potential problems that occur with experiments in doing a good carving designs are done by hand or automatically The definition is a prototype assessment products through on eor more  dimensions of concern. In the process of making utensils or equipment requires some work benchesare wont to do in the workshop in general. After the finished product made testing will be conducted experiments in order to know the performance of the products. Testing is carried out using a sample design engraving. The concept of design and manufacture of the products is a bigpart of engineering Activities. This activity starts with he obtained perceptions about human needs, which are then followed by the concept, then designing, developing and refining the product, ending with the manufacture of the product

Downloads

Download data is not yet available.

References

Jaedun, A. (2011). Metodologi Penelitian Eksperimen, Makalah Pelatihan Penulisan Artikel Ilmiah, 1-11

Nofrial. (2014). Ukiran Akar Kayu Pulau Betung Jambi Menuju Industri Kreatif. Ekspresi Seni Jurnal Ilmu Pengetahuan dan Karya Seni,16(1), 65-85.

Prasetyo, Y.Y. (2014). Perancangan Alat Ukir Tiga Dimensi Dengan metode Ergonomi, Skripsi Teknik Industri FT-Universitas Wijaya Surabaya.

Sari, S.C., Jannati, R.P. (2015). Jenis & Paradigma Metodologi Penelitian Eksperimen, Makalah Magister Pendidikan Matematika FKIP-Universitas Sriwijaya Palembang,1-36.

Salma, I.R. (2014). Seni Ukir Tradisional Sebagi Sumber Inspirasi Penciptaan Batik Khas Baturaja. Jurnal Dinamika Kerajinan dan Batik, 31(2), 75-84.

Wahyuni, R.T., Purwanto, D., Sardjononulis, T.A. (2013). Aplikasi Rekonstruksi 3 Deimensi Pada Proses Pemahatan menggunakan CNC. Jurnal Elektro dan Komputer, 1(2), 180-190.

Yaqin, A. (2013). Pitutur Luhur Sebagai Teks Kaligrafi Jawa Dalam Karya Ukir Kayu.Arty: Jurnal of Visual Art, 2(1), 1-12.

Downloads

Published

2018-08-01

How to Cite

Rusdiyantoro, R. (2018). DESIGN OF WOODWOOD MACHINERY USING ROUTER: DESIGN OF WOODWOOD MACHINERY USING ROUTER. Tibuana, 1(1), 6–14. https://doi.org/10.36456/tibuana.1.1.1584.6-14

Issue

Section

Article

Most read articles by the same author(s)