Application of Overall Equipment Effectiveness and Failure Mode Efffect and Criticality Analysis Methods to Improve Machine Performance EffectivenessAbstract views: 63
PT XYZ is a company that produces hot rolled coils (HRC) steel products. One of the machines used in the process is a rough mill machine in the milling process. The problem is downtime on the rough mill machine that disrupts the production process time. The purpose of this study is to determine the value of the effectiveness of the machine, find the largest losses that affect the value of the effectiveness of the machine, identify the cause of the biggest losses and provide recommendations for improvement steps. The methods used are overall equipment effectiveness (OEE), six big losses, and the failure mode effect and criticality analysis (FMECA). The results show that the average OEE value of PT XYZ is 80%, but this value was still not following the ideal standard. By identifying the six big losses, the most significant losses are reduced speed losses, with a total percentage value of 86% and an average time loss of 5,020 minutes. FMECA results obtain three components that cause the biggest losses: the engine motor, gearbox, and spindle. Recommendations for improvement include making and setting schedules, implementing predictive maintenance and preventive maintenance on rough mill machines, and regularly checking and replacing component spare parts.
X. Tang, X. Wang, R. Cattley, F. Gu dan A. Ball, "Energy harvesting technologies for achieving self-powered wireless sensor networks in machine condition monitoring: A review," Sensors, vol. 18, no. 12, p. 4113, 2018. DOI: https://doi.org/10.3390/s18124113
D. Dellermann, P. Ebel, M. Söllner dan J. Leimeister, “Hybrid intelligence,” Business & Information Systems Engineering, vol. 61, no. 5, pp. 637-643, 2019. DOI: https://doi.org/10.1007/s12599-019-00595-2
J. Sadowski, Too smart: How digital capitalism is extracting data, controlling our lives, and taking over the world, MIT Press, 2020. DOI: https://doi.org/10.7551/mitpress/12240.001.0001
A. Cachada, J. Barbosa, P. Leitño, Gcraldcs, C.A., L. Deusdado, J. Costa, C. Teixeira, J. Teixeira, A. Moreira, P. Moreira dan L. Romero, "Maintenance 4.0: Intelligent and predictive maintenance system architecture," In 2018 IEEE 23rd international conference on emerging technologies and factory automation (ETFA), vol. 1, pp. 139-146, 2018 September. DOI: https://doi.org/10.1109/ETFA.2018.8502489
D. Setiawan, N. Jusolihun dan W. Cahyo, "Maintenance system design on air jet loom (AJL) machine using reliability centered maintenance (RCM) method," IOP Publishing, In IOP Conference Series: Materials Science and Engineering, vol. 673, no. 1, p. 012102, 2019 December. DOI: https://doi.org/10.1088/1757-899X/673/1/012102
R. F. Manik, "Analisis Produktivitas Dengan Metode Overall Equipment Effectiveness (OEE) Dalam Penerapan Total Productive Maintenance (TPM) Pada Mesin Polymer," Journal of Industrial and Engineering System (JIES), vol. 1, p. 53–64, 2018.
A. Rozak, A. Shadrina dan E. Rimawan, "Kaizenin world class automotive company with reduction of six big lossesin cylinder block machining line in Indonesia," International Journal of Innovative Science and Research Technology, vol. 4, no. 7, pp. 339-344, 2019.
Z. Wang, R. Wang, W. Deng dan Y. Zhao, "An Integrated Approach-Based FMECA for Risk Assessment: Application to Offshore Wind Turbine Pitch System," Energies, vol. 15, no. 5, p. 1858, Vol. 15, No. 5, pp.1858, 2022. DOI: https://doi.org/10.3390/en15051858
J. Hegde dan B. Rokseth, "Applications of machine learning methods for engineering risk assessment–A review," Safety science, vol. 122, p. 104492, 2020. DOI: https://doi.org/10.1016/j.ssci.2019.09.015
P. H. Tsarouhas, "Overall equipment effectiveness (OEE) evaluation for an automated ice cream production line: A case study," International Journal of Productivity and Performance Management, 2019. DOI: https://doi.org/10.1108/IJPPM-03-2019-0126
R. Prabowo dan E. Sulistyowati, "Analysis of Total Productive Maintenance (TPM) and Failure Mode and Effect Analysis (FMEA) to improve machine effectiveness: A study on Indonesia's sugar mills," In IOP Conference Series: Materials Science and Engineering, vol. 885, no. 1, p. 012063, 2020 July. DOI: https://doi.org/10.1088/1757-899X/885/1/012063
M. M. Safaat dan N. Fatimah, "Analysis of the Causes of Potential Failure on the Critical Path Using FMEA for Project Bag Case Packer In Robotic Machinery Automation Manufacturing Companies," Journal of Islamic Economics Perspectives, vol. 4, no. 2, pp. 16-26, Vol. 4, No. 2, pp.16-26, 2022.
K. Ding, F. T. Chan, X. Zhang, G. Zhou dan F. Zhang, "Defining a digital twin-based cyber-physical production system for autonomous manufacturing in smart shop floors," International Journal of Production Research, vol. 57, no. 20, pp. 6315-6334, 2019. DOI: https://doi.org/10.1080/00207543.2019.1566661
A. Pontiana dan M. L. Singgih, “Perbaikan Proses Produksi Jerrycan 5 Liter di PT. Kemasan Menggunakan Pendekatan Lean Manufacturing,” Jurnal Teknik ITS, vol. 9, no. 2, pp. F310-F315, 2021. DOI: https://doi.org/10.12962/j23373539.v9i2.56067
M. Rusman, S. M. Parenreng, I. Setiawan, S. Asmal dan I. Wahid, "The Overall Equipment Effectiveness (OEE) analysis in minimizing the Six Big Losses: An effort to green manufacturing in a wood processing company," In IOP Conference Series: Earth and Environmental Science, vol. 343, no. 1, p. 012010, 2019 October. DOI: https://doi.org/10.1088/1755-1315/343/1/012010
A. P. Herry, F. Farida dan N. I. Lutfia, "Performance analysis of TPM implementation through Overall Equipment Effectiveness (OEE) and Six Big Losses," In IOP Conference Series: Materials Science and Engineering, vol. 453, no. 1, p. 012061, 2018 November. DOI: https://doi.org/10.1088/1757-899X/453/1/012061
B.A. Suharjo, O. S. Suharyo, A. Bandono, "Failure mode effect and criticality analysis (FMECA) for determination time interval replacement of critical components in warships radar," Journal of Theoretical and Applied Information Technology, vol. 97, no. 10, pp. 61-70, 2019 May 31.
P. Dobra dan J. Jósvai, "Enhance of OEE by hybrid analysis at the automotive semi-automatic assembly lines," Procedia Manufacturing, vol. 54, p. 184–190, 2021. DOI: https://doi.org/10.1016/j.promfg.2021.07.028
T. H. Lakho, M. A. Khan, S. I. Virk dan A. A. Indher, "Implementation of Overall Equipment Effectiveness (OEE) in Maintenance Management," In Proceedings of the International Conference on Industrial Engineering and Operations Management, pp. 07-10, 2020, December.
R. Wang, Z. Chen, T. Zhou dan Y. Xia, "Failure criticality evaluation of ship propeller shaft system based on Fuzzy FMECA method," In Journal of Physics: Conference Series, vol. 1820, no. 1, p. 012117, 2021, March. DOI: https://doi.org/10.1088/1742-6596/1820/1/012117
M. Catelani, L. Ciani, D. Galar, G. Guidi, S. Matucci dan G. Patrizi, "FMECA assessment for railway safety-critical systems investigating a new risk threshold method," IEEE Access, vol. 9, pp. 86243-86253, 2021. DOI: https://doi.org/10.1109/ACCESS.2021.3088948
C. Sassanelli, A. de Carolis dan S. Terzi, "Integrating Failure Mode, Effect and Criticality Analysis in the Overall Equipment Effectiveness Framework to Set a Digital Servitized Machinery: An Application Case. In A. Dolgui, A. Bernard, D. Lemoine, G. von Cieminski, & D. Romero (Eds.)," Advances in Production Management Systems. Artificial Intelligence for Sustainable and Resilient Production Systems, Springer International Publishing, p. 143–152, 2021. DOI: https://doi.org/10.1007/978-3-030-85902-2_16
F. Antonius, “Penerapan total productive maintenance dalam meningkatkan overall equipment effectiveness pada lini produksi air minum dalam kemasan botol (Doctoral dissertation),” Universitas Tarumanagara, 2021.
F. Kristian, J. Mulyono dan H. Santosa, "Preventive Maintenance Scheduling on Belt Conveyor Using Failure Mode Effect and Criticality Analysis"," Jurnal Sistem Teknik Industri, vol. 23, no. 1, pp. 111-120, 2021. DOI: https://doi.org/10.32734/jsti.v23i1.4368
Christi, O. Ferrina dan E. Yuliawati, “Peningkatan Efektivitas Mesin TMC Segmen CBE 1160 Melalui Analisis Overall Equipment Effectiveness (OEE) (Studi kasus: PT ETA Indonesia).,” Jurnal Senopati, vol. 1, no. 2, p. 64–75, 2020. DOI: https://doi.org/10.31284/j.senopati.2020.v1i2.527
How to Cite
Copyright (c) 2023 Tibuana
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.