The Influence of Occupational Safety for Iron Frame Installation Project Workers Using FMEA Approach in CV. Sinar Surya Abadi Sidoarjo

 Abstract views: 92

Authors

  • Helga Adityawan universitas pgri adi buana surabaya
  • . Rusdiyantoro Universitas PGRI Adi Buana Surabaya

DOI:

https://doi.org/10.36456/tibuana.7.2.8773.82-89

Keywords:

Refinement of Iron; K3; FMEA; Failure Mode

Abstract

CV. Sinar Surya Abadi is a company engaged in the installation of iron frames. The manufacture of these products cannot be separated from hazardous equipment such as grinders, plasters, and others. This causes the risk of accidents at work. Thus the application of Occupational Safety and Health (K3) is very important to implement. Based on these problems, a study was made regarding the influence of work safety for project workers including iron with the FMEA approach on CV. Sidoarjo Eternal Sunshine. Occupational Health and Safety is a situation that affects the health and safety of workers or other employees. Occupational accidents can be reduced by implementing occupational safety and health (K3). FMEA is a structured procedure to identify and prevent as many failure modes as possible. FMEA focuses on preventing defects, increasing safety, and increasing customer satisfaction. The advantage of this FMEA is that it can improve the quality of control of the implementation of K3 so that it can prevent work accidents. FMEA serves to determine the actions of prioritized risks. The use of FMEA is also used to find out what potential risks exist in a production process. And also used to analyze failures from human error or the machine used.

Downloads

Download data is not yet available.

References

Alfandi Arifuddin. (2022). Analysis of the Risk of Work Accidents in the Construction of Steel Tower Construction (Case Study: Construction of the Grati-TX Kalanganyar Extra High Voltage Air Duct, Surabaya City, East Java). Civil Engineering Undergraduate Study Program. Civil Engineering Department, Faculty of Engineering. Bosowa University. Makassar.

Deta Awalurahma Wibisana. (2016). Work Accident Risk Analysis for the Tugu Dam Project, Trenggalek Regency Using the FMEA (Failure Mode and Effect Analysis) Method and the Domino Method. Department of Civil Engineering. Sepuluh Nopember Faculty of Technology. Surabaya.

Elfira Vidian Paquita and Pringgo Widyo Laksono. (2022). Efforts to Control Product Quality Using the FMEA Method and Kaizen Approach at PT Dan Liris. IDEC National Seminar and Conference. ISSN: 2579 – 6429.

Erniati Bachtiar, Mahyuddin, Nur Khaerat Nur, et al. (2021). Construction K3 Management. Publisher: Kita Write Foundation. Maros. Makassar. South Sulawesi.

Febryyana Lydwina Situmorang. (2019). Analysis of the Implementation of K3 Using the Fault Tree Analysis Approach in Increasing Work Productivity at PT XYZ. Industrial Engineering Study Program. Faculty of Engineering. Mercu Buana University. Jakarta.

Jimly Hambali Latuconsina. (2021). Analysis of the Effect of Implementing Occupational Safety and Health on the Performance of Construction Workers on the Wayame Ambon Pressurized LPG Terminal Construction Project. Civil Engineering Study Program. Faculty of civil engineering and planning. Indonesian Islamic University.

Nasir Bumulo, Sartan Nento, Cindra Demanto. Rahman A. Djau. (2022). Analysis of the Effect of Occupational Safety and Health on Construction Worker Performance. RADIAL. Journal of Science, Engineering and Technology Civilization. Vol. 10. No. 2. Pg. 241 – 248. ISSN: 2337 – 4101. E-ISSN: 2686 – 553X.

Rahmi Meliyandini. (2022). Welding Process Quality Control Using the Six Sigma Method and Failure Mode and Effect Analysis (FMEA) (Case Study: UMKM Cipta Utama). Industrial Engineering Study Program. Industrial Technology Faculty. Industrial Technology Faculty. Indonesian Islamic University. Yoyakarta.

Rika Ainil Fitri, Vita Efelina. (2021). Analysis of Frequency Rate and Severity Rate in Work Accidents at PT. XYZ. Go – Integrative: Journal of Systems and Industrial Engineering. Vol. 02. No. 02. Pg. 102 – 111. P-ISSN: 2723 – 7842. E-ISSN: 2745 – 3510. DOI: https://doi.org/10.35261/gijtsi.v2i2.5644

Sritika Efrilia. (2022). Study of Occupational Safety and Health (K3) Risk Management in the Lakuang Burai Reservoir Development Project, Limapuluh Kota Regency. Civil Engineering Study Program, Faculty of Engineering. Riau Islamic University. Pekanbaru.

Suseno, Syarial Ihza kalid. (2022). Quality Control of Leather Bag Product Defects using the Failure Mode and Effect Analysis (FMEA) and Fault Tree Analysis (FTA) Method at PT. Mandiri Jogja International. JCI. Ilimiah Horizon Journal. Vol. 1.No. 6. DOI: https://doi.org/10.53625/jcijurnalcakrawalailmiah.v1i6.1131

Thabita Rifda Annafi. (2022). Analysis of Potential Risks Causes of Repairs in the Bass String Assy Up Department Using the Failure Mode and Effect Analysis (FMEA) and Fault Tree Analysis (FTA) Methods (Case Study: PT. Yamaha Indonesia). Industrial Engineering Program. Industrial Technology Faculty. Indonesian Islamic University. Jakarta.

Downloads

Published

2024-07-28

How to Cite

Adityawan, H., & Rusdiyantoro, . (2024). The Influence of Occupational Safety for Iron Frame Installation Project Workers Using FMEA Approach in CV. Sinar Surya Abadi Sidoarjo. Tibuana, 7(2), 82–89. https://doi.org/10.36456/tibuana.7.2.8773.82-89

Issue

Section

Article