Quality Control Analysis of Fireproof Stone with New Seven Tools Method at PT. Loca Refractories Wira Jatim

Amastasia Cindy Umami; Dwi Sukma Donoriyanto

doi:10.36456/tibuana.5.02.5411.69-75

Authors

Amastasia Cindy Umami UPNV Jatim
Dwi Sukma Donoriyanto UPN Veteran Jatim

DOI:

https://doi.org/10.36456/tibuana.5.02.5411.69-75

Keywords:

Defective Products, Refractory Stone, Quality Control, New Seven Tools

Abstract

PT. Loka Refractories Wira Jatim is a manufacturing company that produces refractory stones. In carrying out the production process, defective products are often found. In this study, an analysis of the quality control of refractory stone will be carried out using the New Seven Tools method. The purpose of this study was to determine the quality of refractory stone, the factors that cause disability and the impact. In addition, suggestions for improvements will be given to improve the quality of the refractory stone produced. The results showed that the most common types of defects were 50% in April 2021, while the types of defects that occurred the least were > 1 type of defects as much as 2% in October 2020. The factors causing the formation of defective products include human errors, old machines, undeveloped work methods, and poor quality of raw materials. Improvement activities that can be carried out are improving operator performance, improving machine performance, making work methods, and tightening control of raw materials or QC.

References

Aziza, Setiaji. 2020. “Pengendalian Kualitas Produk Mebel dengan Pendekatan Metode New Seven Tools”. Engineering and Science Journal, Vol. 4, No. 1

Devani, Vera, and Melany Oktaviany. "Usulan Peningkatan Kualitas Pulp Dengan Menggunakan Metode Seven Tools Dan New Seven Tools Di Pt. Ik." Agrointek: Jurnal Teknologi Industri Pertanian 15.2 (2021): 521-536.

Ginting, R., & Fattah, M. G. (2020, April). Production quality control with new seven tools for defect minimization on PT. Dirgantara Indonesia. In IOP Conference Series: Earth and Environmental Science (Vol. 452, No. 1, p. 012082). IOP Publishing.

Handika, F. S.,dan Barnadi, A. B. 2017. “Analisis Pemakaian Listrik pada Pompa Drainage Unit dengan Menggunakan New Quality Tools”. Jurnal Sistem dan Manajemen Industri, Vol. 1, No. 2

Oemar, Hirawati, Widya Widianti, and Dewi Shofi Mulyati. "Perbaikan Kualitas Produk Kaos Sablon Berdasarkan Area Kerja Menggunakan New Seven Tools Dan 5S." Journal of Industrial Engineering 5.2 (2020): 89-100. Suhartini, Suhartini, and Fania Fania. "Pengendalian Kualitas Menggunakan Six Sigma Dan New Seven Tool Untuk Mengurangi Kecacatan Produk Pada Ukm." (2019). Sutarto, H. P., 2017. “Manajemen Mutu Terpadu”. Yogyakarta: UNY Press

Zakariya, Yuza, Muhammad Fuad Fauzul Mu’tamar, and Khoirul Hidayat. "Analisis Pengendalian Mutu Produk Air Minum dalam Kemasan Menggunakan Metode New Seven Tools (Studi Kasus di PT. DEA)." Rekayasa 13.2 (2020): 97-102.