EVALUASI EFISIENSI BIAYA DAN WAKTU PADA PROYEK PEMBANGUNAN JEMBATAN MENGGUNAKAN VALUE ENGINEERING
DOI:
https://doi.org/10.36456/ba854968Abstract
Value Engineering is a systematic approach aimed at enhancing the value of a project by identifying and eliminating costs that do not significantly contribute to the primary function of the construction. The objective of this study is to examine how the application of Value Engineering in bridge construction projects can improve cost and time efficiency, identify the main challenges encountered in implementing Value Engineering in bridge construction projects, and explore solutions to overcome these challenges. Additionally, this study aims to analyze the impact of Value Engineering on the quality, safety, and sustainability of bridge construction projects. The research method used in this study is qualitative. The findings indicate that Value Engineering can be a highly effective tool in enhancing the efficiency of bridge construction projects if implemented correctly. To achieve optimal results, the application of Value Engineering must be conducted through comprehensive analysis, involving experts in the field, and supported by appropriate regulations.
References
B. S. Fikri Pratama and F. Kurnia, ‘ANALISIS STRUKTUR GEDUNG DENGAN MODIFIKASI PELAT LANTAI DAN DINDING DENGAN METODE PENERAPAN REKAYASA NILAI (VALUE ENGINEERING)’, Jurnal ARTESIS, vol. 2, no. 2, 2022, doi: 10.35814/artesis.v2i2.4301.
F. A. Chandra and S. Siswoyo, ‘PENERAPAN VALUE ENGINEERING PROYEK PEMBANGUNAN RUKO PROMENADE TAMAN ASRI PONDOK TJANDRA SURABAYA’, axial : jurnal rekayasa dan manajemen konstruksi, vol. 11, no. 2, 2023, doi: 10.30742/axial.v11i3.3259.
M. P. Nanda, S. Riswanto, and M. Kurniawati, ‘METODE PAIRED COMPARISON PADA PEKERJAAN PONDASI BANGUNAN GEDUNG DENGAN PENDEKATAN STUDI VALUE ENGINEERING (VE)’, JMTS: Jurnal Mitra Teknik Sipil, 2023, doi: 10.24912/jmts.v6i2.23387.
D. Priambudhi, Elizar, and Sapitri*, ‘Aplikasi Value Engineering untuk Optimalisasi Pembiayaan pada Proyek Pembangunan Gedung Kuliah II UIN Suska Riau’, JURNAL TEKNIK, vol. 13, no. 2, 2019, doi: 10.31849/teknik.v13i2.3599.
F. Kormomolin, F. Taihuttu, and M. Kempa, ‘PENERAPAN VALUE ENGINEERING PADA PEMBANGUNAN LAHAN PARKIR FAKULTAS TEKNIK UNIVERSITAS PATTIMURA AMBON’, JURNAL SIMETRIK, vol. 10, no. 1, 2020, doi: 10.31959/js.v10i1.370.
F. Ferdinand and Y. L. D. Adianto, ‘Penerapan Value Engineering pada Proyek Pembangunan Gedung Serbaguna X di Kota Medan’, Journal of Sustainable Construction, vol. 1, no. 2, 2022, doi: 10.26593/josc.v2i1.5696.
J. A. Kencana and M. Waty, ‘PENERAPAN METODE VALUE ENGINEERING DALAM PEMILIHAN JENIS BETON PADA PROYEK KONSTRUKSI PERUMAHAN’, JMTS: Jurnal Mitra Teknik Sipil, vol. 4, no. 1, 2021, doi: 10.24912/jmts.v0i0.10408.
Mohammad Muhlis, ‘APLIKASI VALUE ENGINEERING PADA PROYEK PEMBANGUNAN GEDUNG ICU, ICCU, NICCU RUMAH SAKIT UMUM DR. SAIFUL ANWAR MALANG’, JURNAL DAKTILITAS, vol. 1, no. 1, 2021, doi: 10.36563/daktilitas.v1i1.408.
Haryanto, ‘Penerapan Value Engineering Untuk Meminimalisir Faktor Penyebab Adanya Sisa Material Konstruksi’, Jurnal Civil Engineering Study, vol. 3, no. 01, 2023, doi: 10.34001/ces.03012023.7.
Nicolas Mario Gomos Pandiangan and Dwi Dinariana, ‘Value Engineering Rumah Susun Kedaung Baru Kota Tangerang Menggunakan Teknik Breakdown Cost Model’, IKRA-ITH Teknologi Jurnal Sains dan Teknologi, vol. 8, no. 2, 2024, doi: 10.37817/ikraith-teknologi.v8i2.3248.
A. Nandito, M. Huda, and S. Siswoyo, ‘PENERAPAN VALUE ENGINEERING PADA PROYEK PEMBANGUNAN PUSKESMAS REGO MANGGARAI BARAT NTT’, axial : jurnal rekayasa dan manajemen konstruksi, vol. 8, no. 3, 2021, doi: 10.30742/axial.v8i3.1416.
I. W. Suasira, K. W. Gunawan, N. P. A. Yuliadewi, and I. G. N. E. Partama, ‘OPTIMASI BIAYA PELAKSANAAN KONSTRUKSI GEDUNG DENGAN PENERAPAN VALUE ENGINEERING (Studi Kasus Proyek Pembangunan Gedung Pelayanan Rsud Sanjiwani Gianyar)’, Jurnal Teknik Gradien, vol. 15, no. 01, 2023, doi: 10.47329/teknik_gradien.v15i01.1017.
Alfiatin Eka Andrianti, ‘faktor yang berhubungan dengan tingkat kelelahan kerja pada pekerja pembangunan jembatan ploso jombang’, Paper Knowledge . Toward a Media History of Documents, vol. 3, no. 2, 2021.
Fachmi Fajar Kurniawan, Irza Sukmana, and Sri Waluyo, ‘Value Engineering untuk Beautifikasi Ruang Bawah Flyover pada Pembangunan Flyover Simpang Jam (Laluan Madani)’, Seminar Nasional Insinyur Profesional (SNIP), vol. 2, no. 1, 2022, doi: 10.23960/snip.v2i1.61.
A. Asrullah, D. Diawarman, R. Anggrainy, and K. Afif, ‘ANALISA KUAT TEKAN BETON Fc’25 MPa DENGAN PENAMBAHAN ABU BATU DAN SEMEN MORTAR UTAMA TYPE 400’, Jurnal Teknik Sipil, vol. 11, no. 2, 2022, doi: 10.36546/tekniksipil.v11i2.517.
H. N. Aredha Putra, S. Sugiyarto, and A. Setyawan, ‘ANALISIS VALUE ENGINEERING PADA PONDASI JEMBATAN (STUDI KASUS: PROYEK JEMBATAN KALI CENGGER TOL SEMARANG-SOLO RUAS SALATIGA-BOYOLALI SESI AMPEL-BOYOLALI)’, Matriks Teknik Sipil, vol. 6, no. 4, 2018, doi: 10.20961/mateksi.v6i4.36536.
K. M. Tanoni, S. Siswoyo, and S. Soepriyono, ‘PENERAPAN VALUE ENGINEERING PADA PROYEK PEMBANGUNAN JEMBATAN MAUBASA BELU NTT’, axial : jurnal rekayasa dan manajemen konstruksi, vol. 11, no. 1, 2023, doi: 10.30742/axial.v11i1.2856.
V. P. R. Septiani, M. Ushada, and Suharno, ‘Development of Sago-based Analog Rice Using Kansei and Value Engineering’, Pertanika Journal of Science and Technology, vol. 31, no. 6, 2023, doi: 10.47836/pjst.31.6.17.
Sutikno, A. E. Husin, and A. M. Iswidyantara, ‘Indonesia MICE green building project with value engineering and its influential factors: an SEM-PLS approach’, Sinergi (Indonesia), vol. 27, no. 1, 2023, doi: 10.22441/sinergi.2023.1.012.
A. S. Gunarathne, N. Zainudeen, C. S. R. Perera, and B. A. K. S. Perera, ‘A framework of an integrated sustainability and value engineering concepts for construction projects’, International Journal of Construction Management, vol. 22, no. 11, 2022, doi: 10.1080/15623599.2020.1768624.
W. Y. El-Nashar and A. H. Elyamany, ‘Value engineering for canal tail irrigation water problem’, Ain Shams Engineering Journal, vol. 9, no. 4, 2018, doi: 10.1016/j.asej.2017.02.004.
T. Wei and Y. Chen, ‘Green building design based on BIM and value engineering’, Journal of Ambient Intelligence and Humanized Computing, vol. 11, no. 9, 2020, doi: 10.1007/s12652-019-01556-z.
R. Woodhead and M. A. Berawi, ‘Evolution of Value Engineering to Automate Invention in Complex Technological Systems’, International Journal of Technology, vol. 13, no. 1, 2022, doi: 10.14716/ijtech.v13i1.4984.
A. Sahu, S. Agrawal, and G. Kumar, ‘Triple bottom line performance of manufacturing Industry: A value engineering approach’, Sustainable Energy Technologies and Assessments, vol. 56, 2023, doi: 10.1016/j.seta.2023.103029.
W. El-Nashar and A. Elyamany, ‘Adapting Irrigation Strategies to Mitigate Climate Change Impacts: A Value Engineering Approach’, Water Resources Management, vol. 37, no. 6–7, 2023, doi: 10.1007/s11269-022-03353-4.
M. Youssef, S. M. H. AlDeep, and M. M. Olwan, ‘Value engineering: Case study of Libyan educational buildings’, Alexandria Engineering Journal, vol. 76, 2023, doi: 10.1016/j.aej.2023.06.078.
