Pengendalian Risiko Keselamatan Kerja Unit SLPGT Berbasis JSA-HIRADC
DOI:
https://doi.org/10.36456/h4qwcb14Abstract
The SLPGT unit has high occupational safety risks because it involves LPG, 15% caustic soda, MDEA, pressurized systems, valve operation, inspection, maintenance, and potential leakage. This study aims to analyze and formulate occupational safety risk control in the SLPGT unit using JSA-HIRADC. JSA was used to identify hazards in each work activity, while HIRADC was used to assess risks based on likelihood and consequence. The results identified 12 potential hazards, consisting of 4 high risks, 7 medium risks, and 1 low risk. The highest risks were found in 15% caustic soda filling with a risk score of 16, leakage handling with a risk score of 15, valve opening and closing with a risk score of 12, and minor maintenance with a risk score of 12. Recommended controls include closed transfer systems, gas detection, LOTO, permit to work, emergency shower, spill kit, checklists, and chemical PPE. This study confirms that SLPGT risk control must be based on activity priority and control hierarchy.
References
[1] M. A. Jumali and E. B. Utomo, “CHANGE-ORIENTED LEADERSHIP : SAFETY COMMITMENT OR PERFORMANCE BEHAVIOR,” J. Tek. WAKTU, vol. 16, no. 2, pp. 36–46, 2018, [Online]. Available: http://jurnal.unipasby.ac.id/index.php/waktu/article/view/1666/1542
[2] M. Albar and A. Prasetyo, “Occupational Safety Management in Oil and Gas Industry,” J. Ind. Saf., 2022.
[3] M. A. Jumali, Rusdiyantoro, Yitno Utomo, Moch. Fatur Aangga Pratama, and Harno Suntoko, “Implementation of Workplace Safety in the Welding Industry: Challenges and Solutions,” Tibuana, vol. 8, no. 1, pp. 9–14, 2025, doi: 10.36456/tibuana.8.1.9978.9-14.
[4] R. Septian, “Occupational Health Analysis in Refinery Operations,” Indones. J. Process Saf., 2023.
[5] M. A. Jumali, Rusdiyantoro, A. R. Maulidah, and Y. Utomo, “Rearranging First-In First-Out (FIFO) Parts Layouts,” PROZIMA (Productivity, Optim. Manuf. Syst. Eng., vol. 6, no. 2 SE-Articles, Jan. 2023, doi: 10.21070/prozima.v6i2.1580.
[6] B. Prasisko and M. A. Jumali, “Indentifikasi Jalur Kritis pada Proses Pemindahan Sarana Produksi Krimer Retail dengan Metode CPM pada PT X,” Fact. J. Ind. Manaj. dan Rekayasa Sist. Ind., vol. 4, no. 2 SE-Articles, pp. 246–257, Jan. 2026, doi: 10.56211/factory.v4i2.1382.
[7] R. D. Hernando and M. A. Jumali, “ANALISIS PENJADWALAN PROYEK PEMINDAHAN PENATAAN SELECTIVE RACKING DI GUDANG LOGISTIK MENGGUNAKAN CPM-PERT,” J. Bisnis, Logistik dan Supply Chain, vol. 5, no. 2 SE-Articles, pp. 44–50, Nov. 2025, doi: 10.55122/blogchain.v5i2.1848.
[8] B. Setiyoso and H. Nugroho, “Risk Assessment and Safety Evaluation in Industrial Operations,” J. Risk Eng., 2019.
[9] F. Nadhila and A. Putri, “Probability and Consequence Approach in Occupational Risk Assessment,” J. Occup. Health, 2018.
[10] R. Triswandana and N. Armaeni, “Occupational Risk Identification in Industrial Workplace,” J. Saf. Environ., 2020.
[11] T. Ihsan, T. Edwin, and R. Irawan, “Implementation of HIRADC for Workplace Risk Control,” J. Eng. Saf., 2020.
[12] M. GANGULY, R. AYNYAS, and A. NANDAN, “JSACC model: an approach to optimize the gap in job safety analysis (JSA) to map out inherent risks,” Int. J. Innov. Eng. Res. Manag. ISSN, pp. 2348–4918, 2018.
[13] W. Li, Q. Cao, M. He, and Y. Sun, “Industrial non-routine operation process risk assessment using job safety analysis (JSA) and a revised Petri net,” Process Saf. Environ. Prot., vol. 117, pp. 533–538, 2018.
[14] E. Sulistiyowati and D. Kurniawan, “Job Safety Analysis for Hazard Prevention in Industrial Activities,” J. Ind. Eng., 2019.
[15] Z. Abidin and N. Mahbubah, “Application of Job Safety Analysis in Process Industry,” J. Occup. Saf., 2021.
[16] M. Ardinal, “Job Safety Analysis as a Method for Workplace Hazard Evaluation,” J. Ind. Manag., 2020.
[17] G. Socrates, Risk Management and Hazard Control. Industrial Safety Press, 2013.
